|
Our 5000 VOG air purifier is designed to adsorb the dangerous pollutants emitted through volcanic smog, or vog. Recommended for indoor spaces measuring less than 500 square feet, the 5000 VOG also provides general filtration of chemicals, gases, odors and particles that are present in indoor environments. The UV Lamp also kills illness-causing germs!
Air Flow and Your AllerAir Air Purifier: We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
|
|
|
|
|
|
|
|
|
|
|
-
Features:
- Filtration System: 18 lb. carbon filter, VOG carbon blend, 2.5 in. depth, medical-grade HEPA, pre-filter, UV lamp filter
- Carbon Weight: 18 lbs.
- Surface Area of Carbon Media: 2250 acres
- HEPA: Medical-grade, removes 99.97% of all airborne particles 0.3 microns in size
- Surface Area of HEPA Media: 4778 sq.in
- Micro-HEPA: Not Available
- CFM: 400
- Speed: 3-Speed
- UV Lamp:Yes
- Available Colors: Black, Sandstone, White, Pewter, Red, Copper, Silver, Glossy Black
- Voltage: 115/60Hz or 230/50Hz
- Amps (115V/230V): 1.3/0.5
- Cord Length: 8 feet
- Noise Level: 50-75 dB
- Maneuverability: 4 x 2 in. wheels
- Filter Access: Pre-filter bottom no tools, Main filters bottom with screws
- Motor Details: Motor with a blower wheel
- Dimensions: 20.5 in. (height) x 15 in. (diameter)
- Shipping Weight: Approx.50 lbs.
- Operating Weight: 44 lbs.
- Number of Units per Pallet: Multiple
- CSA/UL: Yes
-
Filtration Types: 8 lb. carbon filter, VOG carbon blend, 2.5 in. depth, medical-grade HEPA, pre-filter, UV Lamp
-
Used In: Large rooms, Schools or Offices, Hospitals and Labs
-
Clean Air Delivery Rate: 400 Cu ft/min
-
Filter Configuration: (1) Prefilter, (1) HEPA filter, (1) VOG Carbon filter, (1) UV filter
-
Portability: 4 x 2 in. wheels
-
Approvals: CSA/UL
-
Available Colors: Black, Sandstone, White, Pewter, Red, Copper, Silver, Glossy Black
-
Fan Speed Control: 3-speed
-
Motor: Motor with a blower wheel
-
Power Requirements: 115/60Hz or 230/50Hz
-
System Efficiency for Particles: 99.97% of all airborne particles 0.3 microns in size
-
Included: Air Purifier with UV Lamp
Product Overview & Specs
Our 5000 VOG air purifier is designed to adsorb the dangerous pollutants emitted through volcanic smog, or vog. Recommended for indoor spaces measuring less than 500 square feet, the 5000 VOG also provides general filtration of chemicals, gases, odors and particles that are present in indoor environments. The UV Lamp also kills illness-causing germs!
Air Flow and Your AllerAir Air Purifier: We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
- Filtration System: 18 lb. carbon filter, VOG carbon blend, 2.5 in. depth, medical-grade HEPA, pre-filter, UV lamp filter
- Carbon Weight: 18 lbs.
- Surface Area of Carbon Media: 2250 acres
- HEPA: Medical-grade, removes 99.97% of all airborne particles 0.3 microns in size
- Surface Area of HEPA Media: 4778 sq.in
- Micro-HEPA: Not Available
- CFM: 400
- Speed: 3-Speed
- UV Lamp:Yes
- Available Colors: Black, Sandstone, White, Pewter, Red, Copper, Silver, Glossy Black
- Voltage: 115/60Hz or 230/50Hz
- Amps (115V/230V): 1.3/0.5
- Cord Length: 8 feet
- Noise Level: 50-75 dB
- Maneuverability: 4 x 2 in. wheels
- Filter Access: Pre-filter bottom no tools, Main filters bottom with screws
- Motor Details: Motor with a blower wheel
- Dimensions: 20.5 in. (height) x 15 in. (diameter)
- Shipping Weight: Approx.50 lbs.
- Operating Weight: 44 lbs.
- Number of Units per Pallet: Multiple
- CSA/UL: Yes
|
|
|
|
|