To link to this article from your blog, copy and paste the url below into your blog or homepage.
Permalink :
The 5000 D Exec is designed to combat gases, odors, and airborne mold spores in a 1,500-square-foot area. Features a 22-pound, military-strength MAC-B filter with activated coconut shell carbon granules and zeolite for extra chemical, odor, and gas removal. With its extra large filter, the 5000 D Exec can attack the worst and tiniest of air problems. Multi-stage filtration produces a CFM (cubic feet per minute) rate of 400, two air changes per hour, and relief of asthma, allergies, and chemical sensitivities. Cleanable pre-filter and an anti-microbial filter for disease-carrying micro-bacteria included. The purifier is available in standard and premium colors. The standard colors are pewter, black, sandstone, white and sandstone colors. The premium colors are silver, red, and yellow colors.
Air Flow and Your AllerAir Air Purifier We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
Check the box next to an accessory to add it to your order.
The 5000 D Exec is designed to combat gases, odors, and airborne mold spores in a 1,500-square-foot area. Features a 22-pound, military-strength MAC-B filter with activated coconut shell carbon granules and zeolite for extra chemical, odor, and gas removal. With its extra large filter, the 5000 D Exec can attack the worst and tiniest of air problems. Multi-stage filtration produces a CFM (cubic feet per minute) rate of 400, two air changes per hour, and relief of asthma, allergies, and chemical sensitivities. Cleanable pre-filter and an anti-microbial filter for disease-carrying micro-bacteria included. The purifier is available in standard and premium colors. The standard colors are pewter, black, sandstone, white and sandstone colors. The premium colors are silver, red, and yellow colors.
Air Flow and Your AllerAir Air Purifier We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
Eliminates high levels of gases, odors, and airborne mold spores with zeolite and activated carbon
22-pound MAC-B filter to absorb 98% of gases over a two-year span
Multiple-room relief from asthma, allergies, chemical sensitivities
For several years, AllerAir has been making high-quality state-of-the-art Air Purifiers. Their goal has been to focus on filtering out harmful impurities other manufacturers of Air Purifiers don't. AllerAir products are used in the most discerning and world renowned institutions such as the Mayo clinic, IBM and the US army.
